Prepare and test your skills
Prepare and test your skills
Free sample question, answered and explained below. The Professional Cloud Architect practice bank has 2,335 more like it. Try 10 free: instant score, no account.
An enterprise is designing high-availability dynamic routing between their Google Cloud Virtual Private Cloud (VPC) network and a secondary cloud environment. They have configured redundant dynamic routing sessions using Cloud Router and Border Gateway Protocol (BGP).
During testing, network engineers observe that when a transit link or intermediate forwarding path fails without tearing down the physical interface, standard BGP hold timers take up to several tens of seconds to declare the peer dead and reroute traffic.
Which feature should you configure on the Cloud Router BGP sessions to rapidly detect forwarding path failures and achieve fast failover?
BGP MD5 authentication is a security mechanism that verifies the integrity and authenticity of routing messages exchanged between BGP peers using a shared secret key.
MD5 authentication prevents unauthorized peers from injecting spoofed routing updates into the BGP session or hijacking routing tables. However, it plays no role in accelerating outage detection or modifying failure-sensing timers.
The scenario required protecting multicloud dynamic routing peering sessions from unauthorized routing updates or route-spoofing attacks using a shared pre-shared key.
Bidirectional Forwarding Detection (BFD) is a lightweight, low-overhead networking protocol designed to rapidly detect communication failures along the data path between two forwarding engines or routing peers.
Standard Border Gateway Protocol (BGP) implementations rely on periodic keepalive messages (often sent every 20–30 seconds, with hold timers around 60–90 seconds) to determine neighbor liveness. If an intermediate switch, transit provider, or link suffers an unannounced forwarding path outage, BGP takes tens of seconds to time out before invalidating the route.
By enabling BFD for Cloud Router, the router sends microsecond-to-millisecond control packets across the session. When packet loss indicates the path is down, BFD immediately signals the routing daemon on Cloud Router to tear down the BGP session and invalidate routes, rerouting traffic across redundant paths in sub-second or low-second intervals.
Enabling BFD directly resolves the issue of delayed failover caused by standard BGP hold timers, fulfilling the strict high-availability requirements of enterprise multicloud networking.
Custom learned routes allow Cloud Router to behave as if it dynamically received a predefined list of destination network prefixes from a BGP neighbor, even if the neighbor does not advertise them directly via BGP.
Custom learned routes simplify route injection and network reachability when dealing with non-BGP devices or specific filtering constraints, but they do not monitor forwarding link health or accelerate path failover.
The remote cloud provider or on-premises peer could not advertise its full IP prefix list dynamically via BGP, requiring Google Cloud to simulate dynamic route learning for those destination ranges.
Advertised Route Priority (MED) is a BGP attribute used by Cloud Router to signal preference to neighboring autonomous systems (AS) when multiple entry points exist into the VPC network.
While MED allows administrators to establish active/passive or primary/secondary traffic routing topologies, it does not provide active path probing or rapid health monitoring. When the primary link fails silently, failover still depends on default BGP keepalive timeouts to expire before traffic switches to the higher-MED backup path.
The requirement was to configure deterministic active/passive ingress traffic routing paths across redundant multicloud interconnects under normal operating conditions.
Answer them yourself and get your score the moment you finish. No account needed.
Full access includes
Keep the momentum going with these hand-picked practice scenarios
Last updated Validated