Prepare and test your skills

Prepare and test your skills

Free sample question with answers and detailed explanation below. The Professional Cloud Network Engineer practice bank has an additional 2,437 practice questions.Try 10 free realistic questions: instant score, no credit card, and no account required.
Your organization uses a Shared VPC architecture with a host project and multiple service projects. You need to integrate an existing third-party SD-WAN environment with Google Cloud using Network Connectivity Center (NCC) Router Appliances in the us-central1 region.
Your design must meet the following architectural and operational requirements:
Which deployment model and configuration should you implement?
us-central1 in the Shared VPC host project using a BGP-capable partner or custom image, enable IP forwarding and the Premium Network Service Tier, attach the VMs to an NCC Router Appliance spoke in the host project, and peer each VM over TCP port 179 with two interfaces on a Cloud Router in us-central1.A Network Connectivity Center (NCC) Router Appliance enables third-party network virtual appliances—such as SD-WAN routers or virtual firewalls—to run on Compute Engine VMs inside Google Cloud and exchange dynamic routes with Cloud Router via Border Gateway Protocol (BGP). When deployed alongside Shared VPC, all control-plane and data-plane components must adhere to strict project-placement and VM-level networking rules.
--can-ip-forward) lets the VM act as a transit router rather than dropping non-local destination packets.us-central1 satisfies the Compute Engine 99.99% multi-zone SLA (compared to 99.5% for a single VM), and peering each VM with two redundant Cloud Router interfaces provides four active BGP sessions with equal-cost multipath (ECMP) resiliency.This architecture satisfies every Google Cloud operational constraint for Router Appliances simultaneously—host-project co-location, multi-zone redundancy, IP forwarding, Premium tier routing, and mandatory NCC spoke attachment—ensuring deterministic failover and supported production operation.
us-central1 in the Shared VPC host project with IP forwarding enabled and the Standard Network Service Tier, and configure standalone BGP peering over TCP port 179 with a Cloud Router in us-central1 without attaching the VMs to an NCC spoke.This configuration places two BGP-capable appliance VMs inside the Shared VPC host project in a single zone using the Standard Network Service Tier, and attempts to establish standalone BGP peering directly with Cloud Router without enrolling the VMs in an NCC spoke.
The two VMs were distributed across multiple zones in us-central1, configured with the Premium Network Service Tier, and explicitly attached to an NCC Router Appliance spoke in the host project before configuring Cloud Router BGP peering.
us-central1.This approach leaves the SD-WAN appliances physically or virtually on-premises as customer premises equipment (CPE) and attempts to register those external CPE IP addresses directly as a Router Appliance spoke in Network Connectivity Center.
projects/PROJECT_ID/zones/ZONE/instances/INSTANCE_NAME) and an RFC 1918 internal IP address assigned to that VM's VPC network interface.You were deploying VLAN attachment spokes for direct Cloud Interconnect BGP peering with on-premises routers—or if you installed the SD-WAN virtual appliance image on Compute Engine VMs in the host project and linked those VMs to the Router Appliance spoke.
us-central1.This configuration attempts to place the third-party SD-WAN Compute Engine VMs inside a Shared VPC service project—where application workloads typically run—while keeping the NCC hub, Router Appliance spoke, and Cloud Router inside the Shared VPC host project.
linkedRouterApplianceInstances and the Cloud Router BGP peer configuration must align within the host project boundary for Router Appliance management, placing the VMs in a service project violates the supported deployment model.The two multi-zone Router Appliance VMs were deployed directly in the Shared VPC host project alongside the NCC hub, spoke, and Cloud Router rather than in a service project.
Answer them yourself and get your score the moment you finish. No account needed.
Full access includes
Keep the momentum going with these hand-picked practice scenarios
Last updated Validated