BGP session

Related topics

• BGP session is part of Cloud Router From the official documentation: “The status of the Cloud Router's BGP sessions”
• BGP peer is part of BGP session From the official documentation: “Each BGP session consists of a BGP interface to the Cloud Router and a BGP peer.”
• BGP peer configures BGP session From the official documentation: “You can enable or disable IPv4 or IPv6 route exchange in a specific BGP session by modifying the configuration of the BGP peer.”
• BGP session depends on Cloud Router From the official documentation: “To create the required BGP sessions, you must create two interfaces on the Cloud Router used by your VLAN attachments.”
• BGP session works with HA VPN From the official documentation: “Additionally, if you are enabling IPv6 traffic for a BGP session used in an HA VPN tunnel, you can specify IPv6 next hop addresses:”
• BGP session depends on VLAN attachment From the official documentation: “After you delete the attachment, no traffic can travel between the VPC network and your on-premises network through the connection, and BGP sessions that use the attachment go down.”
• BGP session depends on VLAN attachments From the official documentation: “If you delete the Cloud VPN tunnel or VLAN attachment associated with a BGP session, the session is automatically shut down.”
• Cross-Cloud Interconnect depends on BGP session From the official documentation: “Cross-Cloud Interconnect uses BGP to exchange routes between your VPC network and your OCI network.”
• Cloud Interconnect is an alternative to Cloud VPN From the official documentation: “Private IP connectivity. These methods require Cloud VPN or Cloud Interconnect:”
• Dedicated Interconnect is an alternative to Partner Interconnect From the official documentation: “You can establish connectivity to on-premises networks using either Dedicated Interconnect or Partner Interconnect.”
• Cloud VPN is an alternative to Dedicated Interconnect From the official documentation: “VPC Peering, [Cloud VPN](/network-connectivity/docs/vpn), or Dedicated Interconnect connections for hybrid workloads”
• Cloud Interconnect works with Cloud Router From the official documentation: “6. Delete the encrypted Cloud Router used for Cloud Interconnect.”
• Cloud Router works with Partner Interconnect From the official documentation: “For Partner Interconnect, all Cloud Routers must have a local ASN of `16550`.”
• Cloud VPN is an alternative to Partner Interconnect From the official documentation: “You can use Dedicated Interconnect, Partner Interconnect, or Cloud VPN to provide hybrid connectivity to your landing zone.”
• BGP works with Cloud Router From the official documentation: “View the status of Cloud Router Border Gateway Protocol (BGP) sessions or the routes that Cloud Router is advertising.”
• Cloud Interconnect works with Cloud VPN From the official documentation: “You must enable high-availability (HA) VPN functionality when using Cloud Interconnect<br>with Cloud VPN.”
• Cloud Interconnect is an alternative to Cross-Cloud Interconnect From the official documentation: “For long-term hybrid or multicloud setups with high outbound data transfer volumes, consider Cloud Interconnect or Cross-Cloud Interconnect.”
• Cloud Interconnect works with HA VPN From the official documentation: “Learn how to deploy HA VPN on top of the encrypted VLAN attachments of your Cloud Interconnect connection.”
• Cloud Router depends on BGP From the official documentation: “BGP enables the dynamic exchange of routes between the Cloud Router and the Router appliance instance.”
• Cloud Router works with VLAN attachments From the official documentation: “On your Cloud Router, add the interface or interfaces that connect to the VLAN attachment.”
• Dedicated Interconnect is part of Cloud Interconnect From the official documentation: “Cloud Interconnect offers two main options for connecting your on-premises network: Dedicated Interconnect and Partner Interconnect.”
• VLAN attachments is part of Cloud Interconnect From the official documentation: “Learn how to deploy HA VPN on top of the encrypted VLAN attachments of your Cloud Interconnect connection.”
• VLAN attachments depends on Cloud Router From the official documentation: “When you create a VLAN attachment, you associate it with a Cloud Router.”
• VLAN attachments is part of Dedicated Interconnect From the official documentation: “The HA VPN gateway or the VLAN attachment for Dedicated Interconnect is configured to use the `IPV4_IPV6` stack type.”
• VLAN attachments is part of Partner Interconnect From the official documentation: “When using Partner Interconnect, you still create VLAN attachments to the VPC networks that you want to use.”
• Cloud Interconnect is an alternative to HA VPN From the official documentation: “As a cost-effective but less optimal option, you can replace one of the Cloud Interconnect connections with a pair of HA VPN tunnels.”
• Cloud Router works with Cloud VPN From the official documentation: “For Cloud Router used with Cloud VPN, set up a dashboard for `network/received_packets_count` and `network/sent_packets_count` to monitor any loss in connectivity.”
• Cloud Router works with HA VPN From the official documentation: “When configuring a new HA VPN gateway, you can create a new Cloud Router, or you can use an existing Cloud Router with existing Cloud VPN tunnels or VLAN attachments.”
• Cross-Cloud Interconnect is part of Cloud Interconnect From the official documentation: “Cloud Interconnect offers three options for connecting to Google Cloud: Dedicated Interconnect, Partner Interconnect, and Cross-Cloud Interconnect.”
• Cross-Cloud Interconnect works with Network Connectivity Center From the official documentation: “You can connect using Cross-Cloud Interconnect by itself or you can set up Cross-Cloud Interconnect as a [Network Connectivity Center](https://cloud.google.com/network-connectivity-center) hybrid spoke.”
• HA VPN is part of Cloud VPN From the official documentation: “1460 bytes, for Cloud VPN—both Classic VPN and HA VPN”
• VLAN attachment depends on Cloud Router From the official documentation: “VLAN attachments for both Dedicated Interconnect and Partner Interconnect must use Cloud Routers; thus, custom dynamic routes provide response paths.”
• VLAN attachment is part of Cross-Cloud Interconnect From the official documentation: “VLAN ID is a field on your Cross-Cloud Interconnect VLAN attachment.”
• BGP works with Cloud Interconnect From the official documentation: “The following terminology applies to the [Border Gateway Protocol (BGP)](https://wikipedia.org/wiki/Border_Gateway_Protocol), which Cloud VPN and Cloud Interconnect use for dynamic routing.”
• BGP works with Cloud VPN From the official documentation: “The following terminology applies to the [Border Gateway Protocol (BGP)](https://wikipedia.org/wiki/Border_Gateway_Protocol), which Cloud VPN and Cloud Interconnect use for dynamic routing.”
• BGP peer is part of Cloud Router From the official documentation: “Add a BGP peer to Cloud Router for each interface.”
• Cloud Interconnect depends on BGP From the official documentation: “The following terminology applies to the [Border Gateway Protocol (BGP)](https://wikipedia.org/wiki/Border_Gateway_Protocol), which Cloud VPN and Cloud Interconnect use for dynamic routing.”
• Cloud Interconnect depends on VLAN attachments From the official documentation: “Using Cloud Interconnect to connect a VPC network to your on-premises network requires a [VLAN attachment](/network-connectivity/docs/interconnect/how-to/dedicated/creating-vlan-attachments).”
• Cloud Router configures BGP From the official documentation: “You cannot create new Classic VPN tunnels that use dynamic routing (BGP) that is managed by a Cloud Router.”
• Cloud Router configures BGP peer From the official documentation: “Then, for each VLAN attachment, use a Cloud Router to configure a Border Gateway Protocol (BGP) peering session.”
• Cloud Router works with Dedicated Interconnect From the official documentation: “Cloud Router provides dynamic (BGP) routing for Cloud VPN, Dedicated Interconnect, and Partner Interconnect.”
• Cloud VPN depends on BGP From the official documentation: “The following terminology applies to the [Border Gateway Protocol (BGP)](https://wikipedia.org/wiki/Border_Gateway_Protocol), which Cloud VPN and Cloud Interconnect use for dynamic routing.”
• Cloud VPN is an alternative to Network Connectivity Center From the official documentation: “This document presents three architectural options for setting up a hub-and-spoke network topology in Google Cloud. The first option uses Network Connectivity Center, the second uses VPC Network Peering, and the third uses Cloud VPN.”
• Cross-Cloud Interconnect depends on BGP From the official documentation: “Cross-Cloud Interconnect uses BGP to exchange routes between your VPC network and your Alibaba network.”
• Cross-Cloud Interconnect depends on Cloud Router From the official documentation: “To configure Cross-Cloud Interconnect, you need a Cloud Router.”
• Cross-Cloud Interconnect is an alternative to HA VPN From the official documentation: “Set up either Cross-Cloud Interconnect or HA VPN from AWS or Azure.”
• Dedicated Interconnect depends on Cloud Router From the official documentation: “Because Dedicated Interconnect and<br>Partner Interconnect require Cloud Router, all<br>the Cloud Router quotas and limits apply.”
• Dedicated Interconnect is an alternative to HA VPN From the official documentation: “For connectivity to private data centers, you can use one of the following hybrid connectivity options: - Dedicated Interconnect - Partner Interconnect - HA VPN”
• HA VPN depends on BGP From the official documentation: “Your peer VPN device or service must support the Border Gateway Protocol (BGP). If it does not, you cannot use HA VPN.”
• HA VPN secures Cloud Interconnect From the official documentation: “While Cloud VPN encrypts traffic between environments, with Cloud Interconnect you need to use either MACsec or HA VPN over Cloud Interconnect to [encrypt traffic in transit](/docs/security/encryption-in-transit) at the connectivity layer.”
• HA VPN is an alternative to Partner Interconnect From the official documentation: “For connectivity to private data centers, you can use one of the following hybrid connectivity options: - Dedicated Interconnect - Partner Interconnect - HA VPN”
• Network Connectivity Center works with VLAN attachments From the official documentation: “NCC integrates hybrid network connections by supporting Cloud Interconnect VLAN attachments, HA VPN tunnels, and Router appliance VMs.”
• Partner Interconnect is part of Cloud Interconnect From the official documentation: “Cloud Interconnect offers two main options for connecting your on-premises network: Dedicated Interconnect and Partner Interconnect.”
• Partner Interconnect depends on Cloud Router From the official documentation: “Because Dedicated Interconnect and<br>Partner Interconnect require Cloud Router, all<br>the Cloud Router quotas and limits apply.”
• Partner Interconnect works with VLAN attachment From the official documentation: “You can use an existing Cloud Router if the router does not already manage a BGP session for a VLAN attachment associated with a Partner Interconnect connection.”
• VLAN attachment is part of Cloud Interconnect From the official documentation: “However, interconnect attachments, which run inside of this connection, are regional resources.”
• VLAN attachment is part of Dedicated Interconnect From the official documentation: “When creating an encrypted VLAN attachment for Dedicated Interconnect, the following error message appears:”
• VLAN attachment is part of Partner Interconnect From the official documentation: “When specifying encrypted VLAN attachments for Partner Interconnect for your HA VPN gateway interfaces, the following error message appears:”
• VLAN attachments is part of Cross-Cloud Interconnect From the official documentation: “VLAN attachments for Cross-Cloud Interconnect are listed as attachments of type **Dedicated (Cross-Cloud)**.”
• VLAN attachments depends on Cross-Cloud Interconnect From the official documentation: “After your Cross-Cloud Interconnect connection is established, you must configure VLAN attachments in Google Cloud.”